Doing Business With the District
Invitations for bid and/or requests for qualifications for Maricopa County can be found at www.bidsync.com. You must be registered to view solicitations.
Additional instructions for registering on BidSync and how to respond to a bid can be found on our Vendor Registration page.
The Flood Control District has project sites that have plans for basins and channels that can be pre-excavated by entities in need of fill dirt, typically at little or no cost for the material. Insurance and bonding required. If you have an interest in excavating at any of the sites listed below, please call Sarelda Marshall at 602-506-4583 to receive information regarding the process.
Please see the following listing for locations, quantities, and soil reports.
Chandler Heights Basin
The Chandler Height Basin is located at the southwest corner of Queen Creek Road and Higley Road, has 1.4 million cubic yards of fill dirt available. View the Soils Report for Chandler Heights Basin (PDF).
- Drainage Design Manual for Maricopa County, Volume I Hydrology - revised 12/14/18 (PDF)
- Drainage Design Manual for Maricopa County, Volume II Hydraulics - revised 12/14/18 (PDF)
- Drainage Design Manual for Maricopa County, Volume III Erosion - revised 7/30/18 (PDF)
- Drainage Policies and Standards Manual for Maricopa County - revised 8/22/18 (PDF)
The District provides useful engineering software and training opportunities for the benefit of the private and public sector working on hydrology, hydraulics, and flood control projects.
The software can be used for hydrologic, hydraulic, river mechanic modeling as part of Maricopa County's permit application (drainage use permit, floodplain use permit, sand and gravel permit, and right-of-way permit) as well as the District's floodplain delineation studies, watercourse master studies/plans, area drainage master studies/plans, and capital improvement projects.
Software and resources listed on this site are provided as a public service. The use of the software, results, and any information of this web page is the responsibility of the user. The user releases, indemnifies and holds free the Flood Control District of Maricopa County from any and all liabilities, damages, lawsuits, and causes of action that result as a consequence of their reliance on this webpage.
HEC-1 HC Card Cumulative Drainage Area Calculation Tool
The software is designed to automatically calculate the drainage area at each hydrologic concentration point in an existing HEC-1 input file.
FLO-2D Web Access Tool
This map is intended for use by experienced engineers as a design aid for preparing site drainage and grading plans, and for establishing building lowest floor elevations for new structures. Users are strongly encouraged to consult with District staff or the appropriate governing agency prior to applying this information for the first time to obtain a clear understanding of the basis for the information and for guidance in its application. The map, however, is not an official document that may be used for floodplain determination.
These maps are designed to assist in obtaining the results of two-dimensional hydrologic and hydraulic modeling prepared as a part of Area Drainage Master Studies/Plans or Floodplain Delineation Studies . The information available are estimates of the peak discharge in cubic feet per second from designated storm frequencies, the dominate direction of that discharge, and the resulting peak water surface elevation on the NAVD 1988 vertical datum. The results are the average for each grid element.
NSTPS Tool 1.0.0
Released: June 17, 2013 (Beta version)
NSTPS Tool 1.0.0 is a software package designed to automatically update the NSTPS parameter (HEC-1 RS card's first field) for flow routing in channels in an HEC-1 input file.
Drainage Design Management System
The latest version (Version 5.6.0 - August 2018), as well as prior versions and upgrade versions of the DDMSW, are available via this website for free download.
The DDMS is a Windows tool that was initially developed as a pre-processing tool for HEC-1 modeling. Additional functionalities have been added; which include Storm Drainage Hydraulics and River Mechanics.
Flood Control District Library
Search through a variety of additional resources and manuals made available online on our Flood Control District Library.
Commonly Downloaded Manuals
- Drainage Design Manual, Hydrology
- Drainage Design Manual, Hydraulics
- Drainage Design Manual, Erosion Control
- Drainage Policies and Standards Manual
Best Management Practices
Best management practices (BMPs) help control urban storm runoff by reducing runoff and improving water quality from storm events. BMPs include structural controls such as infiltration devices, ponds, filters and constructed wetlands, and non-structural controls such as maintenance practices, street sweeping, public education and outreach programs.
View individual drawings of our Best Management Practices (BMP) as PDF files or alternatively, you can download the entire set of BMP Drawings as DGN files.